Pure titanium round bar is divided into Gr1, Gr2,Gr3, and Gr4 according to its impurity contents.
Gr2 titanium round bar is commonly used in many industry fields because of its moderate corrosion resistance and comprehensive mechanical properties.
The characteristics of Gr2 titanium round bar are high specific strength, good plasticity, ease for processing, forming, stamping, welding, and good machine-ability; It has good corrosion resistance in the atmosphere, seawater, wet chlorine and oxidizing, neutral and weak reducing media, and its oxidation resistance is better than most austenitic stainless steels; but However, the heat resistance is poor and the service temperature should not be too high.
Grade: Gr1,Gr2,Gr3,Gr4.
Standard: ASTM B348,ASME SB348,ASTM F67,ASTM F136,ISO-5832-2,ISO5832-3,AMS 4928...
Diameter: Dia.Ø 4mm-250mm length: 100mm-6000mm
Technique: Forged & rolling
Qualification: Certificate issued by authorized qualified third-party including Bao Ti & China northwest institute for non-ferrous metals research
Gr2 titanium round bar chemical requirements | |||||||||||
Grade |
C max. |
O max. |
N max. |
H max. |
Fe |
AL |
V |
Pd |
Mo |
other max. each |
Other max.Total |
Gr2 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
/ |
/ |
/ |
/ |
0.1 |
0.4 |
Gr2 titanium round bar tensile requirements | ||||||
Grade |
Tensile strength, min ksi |
Tensile strength, min Mpa |
Yield strength, min Ksi |
Yield Strength min Mpa |
Elongation in 4D, min% |
Reduction of area, min % |
Grade 2 |
50 |
345 |
40 |
275 |
20 |
30 |
Gr2 titanium round bar is mainly used for stamping parts and corrosion-resistant structural parts with working temperature below 350 ℃ and little stress, but good plasticity is required, such as aircraft skeleton, skin and engine accessories; Seawater corrosion-resistant pipes, valves, pumps, hydrofoils, and seawater desalination system parts for ships; Heat exchanger, pump body, distillation tower, cooler, agitator, tee joint, impeller, fastener, an ion pump, compressor air valve, diesel engine piston, connecting rod, leaf spring, etc
Balti is a China titanium rod manufacturer that can provide titanium round rods/rods, titanium square rods, and titanium hexagonal rods.
Grade 1, Grade 2, Grade 4, Grade 5, 6al4v titanium rod, grade 7, and Grade 12 are mainly used in aerospace, chemical, mechanical equipment, electroplating equipment, chemical equipment,
In industries such as petroleum coking zinc equipment, medical treatment, various precision machinery, etc., small MOQs are supported. Surface: pickling, polishing, slicing (H11, H9, H8).
DHL airfreight, courier & by sea transport
All Chinese seaports are available (preferable Shanghai)
1. How can we know the quality of your Gr2 titanium round bar?
Firstly, we can send you samples for your test, Secondly, We will take all products fully inspected before shipping and finally, we have signed international trade insurance, your payment will be 100% refund if any quality problems occurred.
2. Are you a trader or manufacturer?
We have specialized in titanium production and trading for more than 12 years, welcome to visit our company anytime when convenient.
3. How long to take for delivery?
Case varied depending on how complex the products you ordered and the quantities, but normally 5-7 days.
4. Can we pay after receiving the products?
Normally not, we prefer T/T terms initially, but after we have had good co-operations, we would like to consider your requirement.
JFTI-we is the leading manufacturer and supplier of titanium products in China, our main products are including titanium rods, titanium tubes, titanium plates, titanium forgings, titanium wires, titanium filters, titanium CNC machined parts, etc.
We have factory and stockyard areas of more than 6000 square meters, with more than 10 sets of large processing facilities and an annual production of 1000 tons of titanium products.
Contact us if you are interesting, our email: , Whatsapp /Skype:+86 18909174178
http://www.baoti-titanium.com/